Preventive and restorative alternatives to caries by irradiation: a scoping review.

PURPOSE: This study is to conduct a comprehensive scoping review to map scientific evidence and clarify concepts regarding the commonly recommended preventive and restorative dental treatments for patients diagnosed with head and neck cancer (HNC) and subjected to radiotherapy. MATERIAL AND METHODS: This systematic scoping review was performed under the PRISMA-ScR guidelines. The study's experimental design was registered in the Open Science Framework. In vitro studies that evaluated preventive and restorative dental treatment over 50 Gy radiation doses were included. The search was conducted in November 2023 in five electronic databases (PubMed, Scopus, Web of Science, Cochrane Library, and Embase) without language or date restriction. A search strategy was applied based on keywords, MeSh terms, or synonyms. A descriptive analysis was conducted. RESULTS: A total of 49 studies, out of 3679 original articles identified, were included and reviewed. Of the included studies, three evaluated saliva stimulants and 35 evaluated fluoride-based preventive materials: gel (n = 18) toothpaste (n = 11) mouth rinse (n = 8) and varnish (n = 5) while 14 evaluated restorative materials: resin composite (n = 12) glass ionomer cement (n = 6) and amalgam (n = 1) Of those studies, 36 were clinical trials and 13 were in vitro studies. CONCLUSION: Fluoride gel was the most frequently recommended preventive material for preventing radiation caries with supportive clinical evidence. Resin composite and glass ionomer were the most frequently used restorative materials, respectively. However, there is not yet clinical evidence to support the use of resin composite in irradiated teeth.

A depth-resolved quantitative evaluation method for non-carious cervical lesions treatment with optical coherence tomography.

OBJECTIVES: The aim of this study is prognostic assessment of surface smoothness and the presence of internal bubbles after treatment of non-cancerous cervical lesions (NCCLs) using optical coherence tomography (OCT). METHODS: After treatment with NCCLs, cross-sectional images of the lesion parts of the sample were non-invasively acquired and analyzed. The surface smoothness between tooth and resin, resin and cemento-enamel junction, and the presence bubble inside resin was confirmed. In addition, using an algorithm that distinguishes between resin and dental structure based on OCT cross-sectional images, we quantitatively analyzed the amount of resin used in treating NCCLs and acquired 3D images. RESULTS: The inner structure of the resin in each sample was checked, and the presence of bubbles was confirmed. In addition, the resin sections were separated from the tomographic images acquired by OCT to visualize 3D images. The volume of resin used in the treatment part of each NCCLs samples was quantitatively analyzed as 3.7216 ∼ 14.889 mm3. CONCLUSIONS: OCT is able to measure not only the surface abrasion provided by existing intraoral scanner, but also the size and depth location of interal bubbles, which is distinctive advantage of our method. Based on our results, OCT is a significant tool for qualitative and quantitative analysis of dental NCCLs treatment before and after treatment. CLINICAL SIGNIFICANCE: The study used OCT, a non-destructive diagnostic, to reveal the structure of the resin and the location and size of bubbles after NCCLs treatment. These findings could be golden standard in determining the prognosis of NCCLs treatment.

Clinical and radiographic performance of preformed zirconia crowns and stainless-steel crowns in permanent first molars: 18-month results of a prospective, randomized trial.

BACKGROUND: The treatment of young permanent first molars with extensive carious tissue loss may often require restoration with preformed crowns. This study compared the clinical and radiographic performance of stainless-steel crowns (SSCs) and preformed zirconia crowns (ZCs). METHODS: Forty-eight molar incisor hypomineralisation (MIH)- or caries-affected permanent molars in 20 healthy patients between 6-13-year-old were randomly divided into ZC and SSC groups (n = 24 teeth/group) in a split-mouth design. The oral hygiene levels of patients were assessed using Greene and Vermillion simplified oral hygiene index (OHI-S). Plaque accumulation and gingival health were evaluated using the Silness&Löe plaque index (PI) and Löe&Silness gingival index (GI), respectively. Clinical retention, marginal extension level, marginal adaptation of crowns and wear of the antagonist teeth were assessed at baseline, 1, 6, 12 and 18 months. The radiological assessments for evaluating the marginal adaptation of crowns and periapical pathology of crowned teeth were performed at 6 and 12 months. The data were analyzed using Kaplan-Meier analysis, Mann-Whitney U test, and two-way ANOVA. RESULTS: A total of forty teeth in 17 children were evaluated for 18 months. ZCs had significantly lower gingival and plaque index values than teeth restored with SSCs during all evaluation periods (p < 0.05). Neither crown type resulted in clinically-detectable wear on opposing dentition or periapical pathology. One ZC was lost at 13 months, while all SSCs survived in function clinically. The cumulative survival rates of ZCs and SSCs were 95.2% and 100% respectively. CONCLUSIONS: Both ZCs and SSCs showed high clinical retention rates in young permanent molars. ZCs had lower plaque accumulation and better gingival health than SSCs, which were consistently associated with mild gingival inflammation. CLINICAL TRIAL REGISTRATION NUMBER: NCT05049694.

Injectable Composite Resin Technique: An Alternative for Anterior Esthetic Restorations - Case Report / Técnica de Resina Compuesta Inyectable: Una Alternativa para Restauraciones Estéticas Anteriores - Reporte de Caso

This article aims to describe a clinical case of the use of the injectable restorative technique with composite resin in a patient with an esthetic complaint in the anterior teeth. Producing direct restorations in anterior teeth when performed with composite resin demands a long clinical time. Results often depend on the operator's ability to reproduce proper form, function, and esthetics. Lately, the versatility of composite resins has increased. As this material evolved, new techniques were introduced to simplify the restorative process and save time. The restorative technique with injectable fluid composite resin, in addition to delivering faster and with a certain ease, is capable of increasing the predictability of treatment results. However, it is known that flowable resins have lower wear resistance and color stability compared to conventional resins. Thus, a version of this material with a higher filler content in its composition was introduced to the market, to improve wear resistance and gloss retention. Long-term studies evaluating the use of low-viscosity resins are needed. The injectable technique can accurately reproduce the morphology obtained in the wax-up of the case, generating a satisfactory esthetic and functional result. Despite simplifying the fabrication of restorations when compared to the conventional technique, it is still necessary for the operator to have some experience and aptitude. The clinical time for the production of restorations has been considerably reduced. The material showed good flow, shine, and polish in the immediate result. However, the finishing and polishing of the restorations required a longer clinical period than usual and in the short- term follow-up, flaws in the gingival margins and a new finishing and polishing procedure were necessary. Therefore, the technique described in this article can be considered a restorative alternative, but it is still not able to replace the tradit ional method of making previous esthetic restorations.

Este artículo tiene como objetivo describir un caso clínico del uso de la técnica restauradora inyectable con resina compuesta en un paciente con una queja estética en los dientes anteriores. Producir restauraciones directas en dientes anteriores cuando se realizan con resina compuesta demanda un largo tiempo clínico. Los resultados a menudo dependen de la capacidad del operador para reproducir la forma, la función y la estética adecuadas. Últimamente, la versatilidad de las resinas compuestas ha aumentado. A medida que este material evolucionó, se introdujeron nuevas técnicas para simplificar el proceso de restauración y ahorrar tiempo. La técnica restauradora con resina compuesta fluida inyectable, además de una entrega más rápida y segura, es capaz de aumentar la previsibilidad de los resultados del tratamiento. Sin embargo, se sabe que las resinas fluidas tienen menor resistencia al desgaste y estabilidad del color en comparación con las resinas convencionales. Así, se introdujo en el mercado una versión de este material con un mayor contenido de relleno en su composición, con el objetivo de mejorar la resistencia al desgaste y la retención del brillo. Se necesitan estudios a largo plazo que evalúen el uso de resinas de baja viscosidad. La técnica inyectable es capaz de reproducir fielmente la morfología obtenida en el encerado del caso, generando un resultado estético y funcional satisfactorio. A pesar de simplificar la fabricación de restauraciones en comparación con la técnica convencional, todavía es necesario que el operador tenga cierta experiencia y aptitud. El tiempo clínico para la producción de restauraciones se ha reducido considerablemente. El material mostró buena fluidez, brillo y pulido en el resultado inmediato. Sin embargo, el acabado y pulido de las restauraciones requirió de un período de tiempo clínico más largo de lo habitual y en el seguimiento a corto plazo, fueron necesarios defectos en los márgenes gingivales y un nuevo procedimiento de acabado y pulido. Por lo tanto, la técnica descrita en este artículo puede considerarse una alternativa restauradora, pero aún no es capaz de reemplazar el método tradicional de realizar restauraciones estéticas previas.

Harmonização do sorriso: aliando ortodontia e estética / Smile harmonization: combining orthodontics and aesthetics

Atualmente é evidente a demanda contínua por padrões de beleza, cada vez mais impecáveis, um sorriso alinhado e harmônico com dentes brancos para se sorrir com confiança. O tratamento odontológico interdisciplinar tem como intuito proporcionar uma boa saúde periodontal, restabelecer a estética e a função do sistema estomatognático. Objetivo: apresentar um relato de caso clínico envolvendo harmonização do sorriso como cirurgia plástica periodontal para alinhamento da margem gengival na região anterior e restaurações diretas em resina composta após a finalização do tratamento ortodôntico, evidenciando a importância da abordagem conservadora e multidisciplinar no âmbito do tratamento estético. Relato de caso: Realizamos o tratamento ortodôntico com aparelho autoligado cerâmico para alinhamento do arco dental e intrusão do elemento 13, em sequência executamos um recorte gengival nos elementos 12 e 22, clareamento dental associado após 15 dias, subsequentemente, reanatomização dentária no elemento 44 para que o elemento 13 não voltasse a extruir pela falta de contato oclusal, e por fim, remodelação dental fazendo uso de resina composta nos elementos 12, 21 e 22 devido a manchas de hipocalcificação dental. Conclusão: Contudo, a estética bucal tem a capacidade de possibilitar a melhoria na autoestima, devolvendo à função, proporcionando satisfação e bem-estar ao indivíduo, enaltecendo o sorriso.

Currently, the continuous demand for increasingly impeccable beauty standards is evident, an aligned and harmonic smile with white teeth to smile with confidence. Interdisciplinary dental treatment aims to provide good periodontal health, restore the aesthetics and function of the stomatognathic system. Objective: to present a clinical case report involving smile harmonization as periodontal plastic surgery for aligning the gingival margin in the anterior region and direct composite resin restorations after completion of orthodontic treatment, highlighting the importance of a conservative and multidisciplinary approach in the field of aesthetic treatment . Case report: We performed orthodontic treatment with a self-ligating ceramic appliance for aligning the dental arch and intruding element 13, then performed a gingival cutout on elements 12 and 22, associated tooth whitening after 15 days, subsequently, dental reanatomization on element 44 to that element 13 would not extrude again due to the lack of occlusal contact, and finally, dental remodeling using composite resin in elements 12, 21 and 22 due to dental hypocalcification stains. Conclusion: However, oral aesthetics has the ability to improve self-esteem, returning to function, providing satisfaction and well-being to the individual, enhancing the smile.

Manejo de extrusión forzada ortodóntica: Reporte de un caso / Management and Follow-up of Orthodontic Forced Extrusion: A Case Report

El presente caso clínico se enfoca en el diagnóstico y el tratamiento de erupción forzada en un paciente con trauma dental. Objetivo: Proponer una alternativa de tratamiento multidisciplinario el cual permita incrementar estructura dentaria a través de la extrusión forzada y posteriormente rehabilitarlo en función y estética. Métodos: Se describe el caso de un paciente adulto de 78 años de sexo masculino, sano y sin antecedentes patológicos, acude a la clínica de la Especialidad de Ortodoncia y Ortopedia Dentomaxilo facial, referido por un especialista en Endodoncia, debido a fractura corono-radicular de canino superior derecho, pilar de puente fijo de tres unidades En la exploración intraoral presenta fractura cervical de la corona del canino superior derecho. Como primer paso, se realizó tratamiento endodóntico en la pieza dentaria y colocación de un aditamento intraconducto de soporte (endoposte vaciado), con el objeto de mejorar la tracción ortodóntica. Este aditamento consistió en un poste colado con perforaciones. Se procede a colocar aparatología fija en la arcada superior con técnica MBT (slot 0.022), del molar derecho hasta el canino izquierdo de cementado indirecto y pasivo (con los slots de los brackets alineados). Inmediatamente después, se colocó un arco rectangular 0.019 x 0.025 de acero inoxidable con un doblez de extrusión a nivel del canino superior derecho. En el mismo doblez, se adaptó un loop tipo helix que funcionó como apoyo para colocar la ligadura pasiva (lace back). Resultados : El tratamiento realizado en este paciente es satisfactorio, coadyuvando en su estado de salud general mejorando su autoestima. Conclusión: Aquí se aprovecharon todas las ventajas que ofrece la extrusión ortodóntica forzada, incluso en un paciente adulto mayor, logrando una tracción de cuatro milímetros, que se consiguió gracias al empleo de fuerzas extrusivas ligeras y controladas sobre el órgano dentario afectado. Con la modalidad de tratamiento descrita se puede lograr un alargamiento de corona sin la necesidad de realizar una resección ósea, lo que permite una correcta rehabilitación protésica, devolviendo la función y estética al diente lesionado y brindando un beneficio integral al paciente.

The case of an adult patient with a complicated Crown fracture of the right upper canine due to trauma is reported, diagnosing a class VII Ellis coronal fracture. There are several treatment alternatives that range from the extraction, placement of a bone graft and placement of an implant, to a forced root extrusión with bone removal to allow the biological space and subsequently be restored. In the present case, a multidisciplinary orthodontic forced extrusion treatment is performed, which allows to increase the amount of clinical remnant, preserving the periodontal support and maintaining the biologic thickness, thus achieving to maintain the root remnant with good length so that prosthetic rehabilitation is facilitated. The clinical and radiographic follow-up was 12 months. The multidisciplinary treatment involved: Root canal treatment, forced extrusion with orthodontics, fibrotomy with root planing and fixed prosthesis.

Time to complain about pain: Children's self-reported procedural pain in a randomised control trial of Hall and conventional stainless steel crown techniques.

BACKGROUND: Children's pain in dentistry has undesirable short- and long-term consequences; therefore, less invasive treatments merit consideration. AIM: To investigate procedural pain scores for two treatments for carious primary molars in New Zealand primary care. DESIGN: This study was a split-mouth randomised control trial, with secondary outcome analysis. Children (4-8 years) with proximal carious lesions on matched primary molars had one tooth treated with the Hall technique (HT) and one treated with a conventional stainless steel crown (CT); treatment type and order of treatment were randomly allocated (allocation concealment). The Wong-Baker self-report pain scale measured pretreatment dental pain, procedural pain at each treatment and post-operative pain. RESULTS: Data were analysed for 103 children: 49 children had the HT first and 54 children had the CT first. Procedural pain scores did not differ by treatment type, with 71.8% and 76.7% of children reporting low pain for the HT and the CT, respectively. Fewer children reported low procedural pain for the second treatment than the first (p = .047). Most children reported low procedural pain for both treatments (58.3%), although 41.7% experienced moderate-high procedural pain with at least one treatment. CONCLUSIONS: The HT caused pain for as many children as the CT. There is an opportunity for better dental pain management in this setting.

Evaluation of a novel restorative protocol to treat non-carious cervical lesion associated with gingival recession: a 2-year follow-up randomized clinical trial.

OBJECTIVE: To compare 2 different resin composites and 2 adhesive systems used in a new restorative protocol (partial restoration) to treat non-carious cervical lesions associated with gingival recession type 1 (RT1). MATERIAL AND METHODS: Eighty combined defects (CDs) were treated with a partial restoration and periodontal plastic surgery for root coverage. The CDs were randomly assigned to one of the following groups: NP + TE (n = 20), nanofilled composite and 2-step total-etch adhesive system; NP + UA (n = 20), nanofilled composite and universal adhesive system; MH + TE (n = 20), microhybrid composite and 2-step total-etch adhesive; MH + UA (n = 20), microhybrid composite and universal adhesive. Restorations were assessed using the United States Public Health Service (USPHS) criteria at 1 week (baseline) and 6, 12, and 24 months. Survival rate, periodontal parameters, dentin hypersensitivity (DH), and aesthetics were also evaluated. RESULTS: After 24 months, only the MH + TE group did not lose any restoration, with no significant differences between groups. For surface roughness parameter, MH presented 83.3% of the restorations scoring Bravo, whereas NP presented 48.5% of the restorations scoring Bravo. All groups presented restorations with marginal discoloration. All periodontal parameters behaved similarly, regardless of the restorative material. All groups presented significant reductions of dentin hypersensitivity and improved aesthetic perceptions (p < 0.05). CONCLUSION: Both resin composites and adhesives tested can be combined for partial restorations to treat CDs. CLINICAL RELEVANCE: This new restorative-surgical protocol to treat CDs presents satisfactory outcomes. The partial restorations can be successfully executed with both combinations of adhesives and resin composites evaluated in this investigation. TRN : ClinicalTrial.gov: NCT03215615; registration date July 12, 2017.

Grado de microfiltración en ionómero de vidrio y resina compuesta nanoparticulada en lesiones cervicales no cariosas / Degree of microleakage in glass ionomer and nanoparticulate composite resin in non-carious cervical lesions

Introducción: El grado de microfiltración en el ionómero de vidrio y la resina compuesta nanoparticulada en lesiones cervicales no cariosas es de gran importancia para elegir el material restaurador más adecuado para cada caso clínico. Objetivo: Describir el grado de microfiltración en ionómero de vidrio y resina compuesta nanoparticulada en lesiones cervicales no cariosas. Métodos: Se realizó una revisión bibliográfica, correspondiente al nivel exploratorio, en busca de responder cinco preguntas científicas sobre el tema. Se identificaron 62 artículos de las bases de datos de Google Académico o Scopus entre 2015 y 2022. Resultados: Los estudios consultados sugieren que la resina compuesta nanoparticulada es una opción de restauración efectiva y estética en odontología, especialmente en casos de cavidades de alta carga mecánica y estética dental. Los estudios de casos que se revisan demuestran que el grado de microfiltración en las lesiones cervicales no cariosas puede ser significativamente mayor en las restauraciones con ionómero de vidrio en comparación con las resinas compuestas nanoparticuladas. Conclusiones: Se concluye que el elemento fundamental en el tratamiento es realizar un correcto diagnóstico, determinando las necesidades para mejorar la salud dental y realizar una correcta planificación, por lo que es necesario conocer los diferentes tipos de tratamientos con la finalidad de seleccionar el más adecuado, que cumpla con las características biológicas, mecánicas y estéticas, ya que uno de los objetivos fundamentales de cualquier tratamiento es devolver la función y la estética de modo satisfactorio y con la mayor durabilidad posible.

Introduction: The degree of microleakage in glass ionomer and nanoparticulated composite resin in non-carious cervical lesions is of great importance for choosing the most suitable restorative material for each clinical case. Objective: To describe the degree of microleakage in glass ionomer and nanoparticulated composite resin in non-carious cervical lesions. Methods: A literature review, corresponding to the exploratory level, was carried out to answer five scientific questions on the subject. Sixty-two articles were identified from Academic Google or Scopus databases between 2015 and 2022. Results: The studies consulted suggest that nanoparticulated composite resin is an effective and esthetic restorative option in dentistry, especially in cases of cavities with high mechanical load and dental esthetics. The case studies reviewed demonstrate that the degree of microleakage in non-carious cervical lesions can be significantly higher in glass ionomer restorations compared to nanoparticulated composite resins. Conclusions: It is concluded that the fundamental element in treatment is to carry out a correct diagnosis, determining the needs to improve dental health and to carry out correct planning, so it is necessary to know the different types of treatments with the aim of selecting the most suitable one, which complies with the biological, mechanical and esthetic characteristics, since one of the fundamental objectives of any treatment is to restore function and esthetics in a satisfactory way and with the greatest possible durability.

Concordancia entre diferentes observadores en la evaluación de las restauraciones dentales en radiografías panorámicas / Agreement among different observers in the evaluation of dental restorations in panoramic radiographs

El objetivo fue evaluar la concordancia entre dife-rentes docentes del Hospital Odontológico Universi-tario de la Facultad de Odontología de la Universidad de Buenos Aires en la evaluación de restauraciones dentales en radiografías panorámicas. Se diseñó un formulario ad-hoc basado en los criterios de Ryge modificados. Se construyeron cinco categorías: pre-sencia y tipo (R), extensión (E), y condición (C), de cada restauración; situación respecto de tratamientos endodónticos (EN) y presencia y tipo de anclaje intra-rradicular (A). Después de diferentes reuniones vir-tuales de calibración con ajustes correspondientes en el formulario, se seleccionaron al azar veinticinco radiografías panorámicas de la base de datos de la Cátedra de Diagnóstico por Imágenes. Tres observa-dores aplicaron en forma simultánea e independien-te las categorías a tres piezas (1.1, 1.3 y 1.6) en cada radiografía. La concordancia se evaluó con Kappa de Fleiss por categoría y por diente/categoría. Resulta-dos: categoría/diente(IC95%): R:1.1: 0,96 (0,90-1,2), 1.3: 0,77 (0,56-0,99), 1.6: 0,92 (0,80-1,03); E: 1.1: 0,92 (0,85-1), 1.3: 0,89 (0,73-1,04), 1.6: 0,92 (0,80-1,03); C: 1.1: 0,88 (0,78-0,98), 1.3: 0,74 (0,38-1,10), 1.6: 1 (1-1); EN: 1.1 y 1.3: 1 (1-1), 1.6: 0.90 (0.77-1.04); A: 1.1 y 1.6: 1 (1-1), 1,3: 0,88 (0,71-1,04). En las condiciones de este trabajo el grado de concordancia según Landis & Koch fue de casi perfecto a sustancial en todas las situaciones analizadas (AU))

The aim of this study was to assess agreement among different observers in the evaluation of dental resto-rations in panoramic x-rays at the Dental Hospital of the School of Dentistry, University of Buenos Aires. Materials and methods: an ad-hoc form based on the modified Ryge criteria was designed. Five categories were built: presence and type (R), extension (E), and condition (C), of each restoration, if present, pre-sence and condition of endodontic treatment (EN) and presence and type of intra-root anchorage devices (A). After several virtual calibration meetings among the observers with subsequent adjustments in the form, twenty-five panoramic x-rays were randomly selected and all categories were assessed in three teeth (1.1, 1.3 and 1.6) in each image. The assessment was carried out simultaneously and independently by three evaluators, who registered the data in the de-signed form. Agreement was assessed by category and by category/tooth with Fleiss Kappa. Results: category/tooth (95% CI): R/1.1: 0.96(0.90-1.2),1.3: 0.77(0.56-0.99), 1.6:0.92 (0.80-1.03); E/1.1: 0.92 (0.85-1), 1.3: 0.89 (0.73-1.04), 1.6: 0.92 (0.80-1.03); C: 1.1: 0.88 (0.78-0.98), 1.3: 0.74 (0.38-1.10), 1.6: 1 (1-1); EN: 1.1 and 1.3: 1 (1-1), 1.6: 0.90 (0.77-1.04); A: 1.1 and 1.6: 1 (1- 1), 1.3: 0.88 (0.71-1.04). Within the conditions of this study the degree of agreement ac-cording to Landis & Koch was from almost perfect to substantial in all the situations analyzed (AU)

Odontología restauradora mínimamente invasiva: caso clínico / Minimally invasive restorative dentistry: a clinical case

La decoloración de las piezas dentarias puede te-ner un impacto estético y social que lleva a los pa-cientes a buscar una intervención para mejorar su sonrisa. Las manchas superficiales y las irregula-ridades del esmalte pueden deberse a hipoplasias, hipomineralización molar, fluorosis, uso de medica-mentos, manchas blancas causadas por traumatis-mos o infección en la dentición primaria, o manchas post ortodóncicas. El diagnóstico de los defectos del esmalte se realiza a través de un examen visual por transiluminación. Se han propuesto técnicas micro abrasivas con diferentes agentes para eliminar las manchas superficiales del esmalte, así también como el uso de agentes blanqueadores a baja concentra-ción para equilibrar el color de las piezas dentarias. Si las manchas son profundas se requiere de una mega abrasión y posterior restitución anatómica con resinas compuestas. Los avances tecnológicos en los materiales de restauración adhesivos permi-ten imitar las piezas dentarias naturales permitien-do la mínima destrucción de la estructura dental sin comprometer futuras opciones de restauración. El objetivo de este trabajo es mostrar una secuencia de procedimientos mínimamente invasivos para devol-ver la estética perdida en una paciente que concurre a la Cátedra de Odontología Restauradora (AU)

The discoloration of dental pieces can have an aesthetic and social impact that leads patients to seek an intervention to improve their smile. Superficial stains and enamel irregularities may be due to hypoplasia, molar hypomineralization, fluorosis, drug use, white spots caused by trauma or infection in the primary dentition, or post-orthodontic stains. The diagnosis of enamel defects is made through a visual examination by transillumination. Microabrasive techniques with different agents have been proposed to remove surface stains from the enamel, as well as the use of low-concentration whitening agents to balance the color of the teeth. If the stains are deep, a mega abrasion and subsequent anatomical restoration with composite resins are required. Technological advances in adhesive restorative materials make it possible to mimic natural teeth, allowing minimal destruction of tooth structure without compromising future restorative options. The objective of this work is to show the sequence of minimally invasive procedures to return the lost aesthetics in a patient who attends the Chair of Restorative Dentistry (AU)

Effect of partial restorative treatment on stress distributions in non-carious cervical lesions: a three-dimensional finite element analysis.

BACKGROUND: Partial restoration combined with periodontal root coverage surgery can be applied to the treatment of non-carious cervical lesions (NCCLs) accompanied with gingival recessions in clinical practice. However, the feasibility of NCCL partial restorative treatment from a biomechanical perspective remains unclear. This study aimed to investigate the effect of partial restorations on stress distributions in the NCCLs of mandibular first premolars via three-dimensional finite element analysis. METHODS: Three-dimensional finite element models of buccal wedge-shaped NCCLs in various locations of a defected zenith (0 mm, 1 mm, and 2 mm) were constructed and divided into three groups (A, B, and C). Three partially restored NCCL models with different locations of the lower restoration border (1 mm, 1.5 mm, and 2 mm), and one completely restored NCCL model were further constructed for each group. The following restorative materials were used in all restoration models: composite resin (CR), glass-ionomer cement (GIC), and mineral trioxide aggregate (MTA). The first principal stress distributions under buccal oblique loads of 100 N were analyzed. Restoration bond failures were also evaluated based on stress distributions at dentin-restoration interfaces. RESULTS: When the partial restoration fully covered the defected zenith, the first principal stress around the zenith decreased and the maximum tensile stress was concentrated at the lower restoration border. When the partial restoration did not cover the defected zenith, the first principal stress distribution patterns were similar to those in unrestored models, with the maximum tensile stress remaining concentrated at the zenith. As the elastic modulus of the restorative material was altered, the stress distributions at the interface were not obviously changed. Restoration bond failures were not observed in CR, but occurred in GIC and MTA in most models. CONCLUSIONS: Partial restorations that fully covered defected zeniths improved the stress distributions in NCCLs, while the stress distributions were unchanged or worsened under other circumstances. CR was the optimal material for partial restorations compared to GIC and MTA.

Clinical follow-up at 18 months of two bulk fill occlusal composite resins: a double-blind randomized clinical study / Seguimiento clínico a 18 meses de dos resinas compuestas oclusales bulk fill: estudio clínico aleatorio doble ciego

Objetive: To compare the clinical behavior of two types of Bulk Fill composite resins and a nanohybrid resin at 18 months in occlusal restorations. Material and Methods: Three occlusal restorations were performed in each one of the 55 participants. They were randomly distributed into three groups, TN: Tetric-N-Ceram Bulk-Fill, FK: Filtek Bulk-Fill, and Z350: Filtek Z350XT. Adhesive techniques and restorative procedures were performed according to the manufacturer's instructions for each restorative material used. In TN and FK an increment of 4mm was applied, and in Z350 increments of ≤2mm depth were applied. Two calibrated operators evaluated the restorations at baseline and at 18 months using the FDI World Dental Federations system (1: excellent, 2: good, 3: satisfactory, 4: unsatisfactory, 5: poor) for clinical marginal staining (MS) properties, fracture-retention (FR), superficial texture (ST), marginal integrity (MI), postoperative sensitivity (PS) and caries (C). Kruskal-Wallis and Wilcoxon were used to compare the 3 groups at 18 months (5% significance). Results: 38 patients with a total of 114 restorations were assessed, being evaluated with excellent clinical behavior; MI, 78.9% in Z350, 89.51% in TN and 81.6% in FK; ST 73.5% in Z350, 86.8% in TN, and 84.2% in FK; MS 84.2% in Z350, 84.2% in TN, and 91.2% in FK; PS 100% in Z350 and 97.3% in TN and FK; in C and FR, 100% in the 3 groups. There were no significant differences between the three groups (p>0.05). Conclusion: The three resins studied presented a good clinical performance at 18 months without showing significant differences in the clinical properties evaluated.

Objetivo: Comparar el comportamiento clínico a 18 meses en restauraciones oclusales entre dos tipos de resinas compuestas Bulk Fill y una resina nanohíbrida. Material y Métodos: En 55 participantes se realizaron 3 restauraciones oclusales en cada paciente, distribuidas aleatoriamente en 3 grupos, TN: Tetric-N-Ceram Bulk-Fill, FK: Filtek Bulk-Fill y Z350: Filtek Z350XT. Las técnicas adhesivas y procedimientos restauradores fueron realizados según las instrucciones de los fabricantes de cada material restaurador utilizado. En TN y FK se aplicó un incremento de 4mm y en Z350 se aplicó incrementos ≤ 2 mm de profundidad. Dos operadores calibrados evaluaron las restauraciones al baseline y a los 18 meses mediante el sistema FDI World Dental Federations (1: excelente, 2: aceptable, 3: suficiente, 4: insatisfactorio, 5: inaceptable) en las propiedades clínicas de tinción marginal (TM), fractura-retención (FR), textura superficial (TS), integridad marginal (IM), sensibilidad postoperatoria (SP) y caries (C). Se utilizó Kruskal-Wallis y Wilcoxon para la comparación de los 3 grupos a 18 meses (significancia de 5%). Resultados: Se controlaron 38 pacientes con un total de 114 restauraciones, siendo evaluados con comportamiento clínico excelente; IM, 78.9% en Z350, 89.51% en TN y 81.6% en FK; TS 73.5%, en Z350, 86.8% en TN y 84.2% en FK; TM, 84.2% en Z350, 84.2% en TN y 91.2% en FK; SP 100% en Z350 y 97,3% en TN y FK; en C y FR 100% en los 3 grupos. No hubo diferencias significativas entre los 3 grupos (p>0,05). Conclusión: Las 3 resinas estudiadas presentaron un buen desempeño clínico a 18 meses sin mostrar diferencias significativas en las propiedades clínicas evaluadas.

Retrospective Clinical Evaluation of Subgingival Composite Resin Restorations with Deep-Margin Elevation.

PURPOSE: To evaluate the long-term clinical quality of subgingivally placed composite resin restorations and the inflammatory status of surrounding supracrestal gingival and periodontal tissues. MATERIALS AND METHODS: Patients with at least one subgingival restoration with deep-margin elevation placed between 2010 and 2020 at Heidelberg University Hospital and Tübingen University Hospital were identified. A sound tooth was used as control. Intraoral examination including probing depth (PD), clinical attachment level (CAL), bleeding on probing (BOP), gingival bleeding index (GBI), and plaque control record (PCR) was conducted. The clinical quality of the restorations was evaluated using the modified FDI criteria. For comparison between control and test teeth, a logistic mixed-effects model was used for GBI, PCR, and BOP, while a linear mixed-effects model was used for CAL. Multivariable linear and logistic regressions were used to examine the influence of smoking, age of restoration, number of decayed, missing and filled teeth, use of interdental brushes, and CAL. RESULTS: Sixty-three patients were included in the study. The mean age of the restorations was 2.70 ± 1.90 years. There were no significant differences between test and control teeth with respect to inflammatory parameters BOP, GBI, and PCR. CAL was significantly higher in test teeth than in controls (p = 0.027). The regression models revealed that CAL has a significant influence on GBI (p = 0.008) and BOP (p < 0.001). A significantly increased GBI occurred especially on test teeth in patients who did not use interdental brushes daily (p = 0.010). The clinical quality of restorations was rated excellent or good in 70%, an no restoration was rated unacceptable. CONCLUSION: No increased inflammation was observed on sites with subgingivally placed composite restorations over an observation period of approximately 3 years. Regular interdental brush use was associated with less gingival inflammation.

Effects of irradiation, restoration and crown fracture type on the maximum load to fracture traumatized incisors: An ex vivo study.

BACKGROUND/AIMS: Radiotherapy makes teeth prone to tooth fractures. However, the relationship between radiotherapy and maximum load to fracture teeth that suffered a crown fracture is not fully understood. The aim of this study was to evaluate the influence of fracture type, radiation dose, fracture time, and their interactions on maximum load to fracture irradiated teeth. MATERIAL AND METHODS: A total of 140 permanent incisors were divided into two fracture type groups (uncomplicated and complicated) each of which included seven radiation dose subgroups (0, 10, 20, 30, 40, 50, and 60). The test groups were exposed to high-energy X-ray at 2 Gy/day, 5 days/week for a total dose of 10-60 Gy. Control groups were not irradiated. The load where the specimen started to break was obtained two different times. The 1st fracture was performed after radiation therapy, and the 2nd fracture was performed after the restoration of these samples. RESULTS: Fracture type had no effect on the maximum load to fracture. In contrast, the maximum load to fracture teeth decreased with increasing radiation doses. Maximum load to fracture the restored teeth was lower than the 1st fracture results. The general linear model procedure revealed a significant interaction between radiation dose and fracture time. Similarly, there was a significant interaction between the fracture type, radiotherapy dose, and fracture time. Maximum load values of teeth with complicated crown fractures restored with fiber posts and composite were not affected by radiation. CONCLUSION: Teeth that have been subjected to radiotherapy have an increased risk of fracture during dental trauma. However, restoration of the irradiated teeth with fiber posts and composite resin did not affect the maximum load required to fracture them.

A clinical and radiographic comparative evaluation of custom-made zirconia crowns using CAD-CAM and stainless steel crowns in primary molars.

Background and Aim of Study: Early childhood caries is a multifactorial disease process affecting children below 71 months of age and continues to be a global health problem. Stainless steel crowns (SSCs) are widely used and are very popular in pediatric dentistry due to its superiority and durability when compared with multisurface amalgam restorations. However, one of the major disadvantages with these crowns is the poor esthetics. Parents often request for a more esthetic alternative to the SSC. Zirconia crowns are one of the tooth-colored full crown restorations currently available for use in primary teeth. These are available as both preformed and custom-made crowns and show excellent esthetics. However, these require extensive tooth preparation with a subgingival finish lines, which would cause gingival trauma and bleeding during the preparation. The present study uses intraoral scanners for making the custom-made zirconia crowns, which will avoid the conventional impressions. Currently, there are no studies available in pediatric dentistry regarding CAD-CAM crowns. Hence, there is a need for the study. Aim: The aim of this study is to clinically evaluate the performance of preformed SSCs and custom-made zirconia crowns in primary molars. To elicit parental and patient satisfaction with respect to preformed SSCs and custom made zirconia crowns and to radiographically compare the interproximal bone height for 1 year. Methods: The patients were selected with purposive sampling. The tooth of interest was prepared according to the crown it would receive. The upper and the lower arch of the tooth receiving custom-made zirconia crown was scanned using an intraoral scanner. The crowns were cemented using Type 1 glass ionomer cement (GIC) (SSC) and resin modified GIC (custom-made zirconia crown). After the crown placement, the patient and the parent's satisfaction was scaled regarding the time taken, comfort, cost of crown, appearance of crown, etc., using a 5-point Likert scale. A baseline radiograph was taken after crown placement. The patient was recalled every 3 months till 1 year for evaluation (loss of retention, loss of proximal contact, gingival inflammation, opposing tooth wear, and marginal integrity). At the end of 1 year, radiographs were taken to check the interproximal bone. Results: After 1 year evaluation of custom-made zirconia crowns and preformed SSCs in primary molars, it was shown that both SSC and zirconia crowns showed good gingival scores but zirconia crown was better than SSC in improving the gingival health. SSCs showed better results with respect to the opposing tooth wear and marginal adaptability. Parents as well as patients preferred a tooth-colored crown as a treatment option. Conclusion: Custom-made zirconia crowns are comparable to the preformed SSCs and they show better gingival scores and excellent color match.

The Effect of Radiotherapy on the Marginal Adaptation of Class II Direct Resin Composite Restorations: A Micro-computed Tomography Analysis.

This laboratory study was designed to evaluate the marginal adaptation of Class II mesio-occlusodistal (MOD) restorations at the cervical region with micro-computed tomography (micro-CT). Two groups of restorations were compared: 1) those that had been exposed to radiotherapy before restoration was performed using a universal adhesive in etch-and-rinse and self-etch modes; and 2) those that had previously been restored using a universal adhesive in etch-and-rinse and self-etch modes and had subsequently undergone radiotherapy. Sixty intact human molars were randomly divided into groups according to irradiation status: no radiotherapy (control group); radiotherapy followed by restoration (radiotherapy-first group); and restoration followed by radiotherapy (restoration-first group). These three groups were then subdivided into two groups each on the basis of adhesive application type (etch-and-rinse and self-etch modes), for a total of six groups (n=10/group). Standardized Class II MOD cavities were prepared. A universal adhesive (Clearfil Universal Bond Quick, Kuraray, Okayama, Japan) was applied. The teeth were restored with resin composite (Estelite Posterior Quick, Tokuyama, Tokyo, Japan). The radiotherapy protocol was conducted with 60 gray (Gy) at 2 Gy/day, five days a week for six weeks. Adhesive defects were analyzed in distal and mesial views and evaluated with micro-CT (SkyScan 1174v2, Kontich, Antwerp, Belgium) on the basis of the volume of black spaces between the cavity walls and the restorative materials (mm3). The data were analyzed using the Kruskal-Wallis, Mann Whitney U and Wilcoxon tests (p<0.05). The radiotherapy protocol did not affect the marginal adaptation of the universal adhesive at the cervical regions. Regarding the application modes, for the radiotherapy-first group, the self-etch mode caused significantly higher adhesive defects than the etch-and-rinse mode at the dentin margin. For the no-radiotherapy group, the adhesive defects at the dentin margin were significantly higher than at the enamel margin with the application of the etch-and-rinse mode.

Impact of head and neck radiotherapy on the longevity of dental adhesive restorations: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Established restorative protocols for patients after head and neck radiotherapy are lacking, increasing the failure rates of dental adhesive restorations. PURPOSE: The purpose of this systematic review and meta-analysis was to analyze the evidence regarding the impact of head and neck radiotherapy on the longevity of dental adhesive restorations. MATERIAL AND METHODS: A search was performed using PubMed, Scopus, and Embase in May 2018 (updated in November 2020). Data extraction was performed regarding the percentage of restoration failure among dental adhesive materials, including glass ionomer cements, resin-modified glass ionomer cements, and composite resins. Risk of bias was assessed by the meta-analysis of statistics assessment and review instrument (MAStARI). Confidence in cumulative evidence was evaluated by the Grading of Recommendation, Assessment, Development, and Evaluation (GRADE) protocol. RESULTS: Four studies met the inclusion criteria. All included studies were classified as having a moderate risk of bias and reported results regarding class V restorations. Overall, composite resins presented lower failure rates at 2 years (30%) when compared with resin-modified glass ionomer (41%) and glass ionomer cements (57%). Meta-analysis showed that the risk of failure with glass ionomer cements was greater than with resin-modified glass ionomer cements (RR: 1.71, P<.001). Composite resins presented lower risk of failure when compared with glass ionomer (RR: 2.29, P<.001) and resin-modified glass ionomer cements (RR: 1.30, P=.03). Three studies reported results regarding fluoride compliance, which had a negative effect on the survival rates of glass ionomer and resin-modified glass ionomer cements and a positive effect on composite resin restorations. CONCLUSIONS: The results suggest that composite resin restorations associated with fluoride gel compliance seems to be the best alternative for restoring class V lesions in patients after head and neck radiotherapy. However, the results showed moderate certainty of evidence, which justifies the need for more randomized clinical trials regarding this subject.

Avaliação clínica de restaurações Classe V em cavidades tratadas com o laser de Er: YAG associado ao uso de sistemas adesivos autocondicionantes / Clinical evaluation of Class V restorations in cavities treated with Er: YAG laser associated with the use of self-etching adhesive systems

O objetivo deste estudo clínico, controlado, randomizado, cego e prospectivo foi de avaliar a efetividade clínica de restaurações em lesões não cariosas (cavidades Classe V) realizadas em superfícies dentais pré-tratadas ou não com laser de Er:YAG e utilizando dois sistemas adesivos autocondicionantes. Este estudo foi realizado com um total de 91 lesões e divididas em 4 grupos (n = 23) :G1(FL): Sem pré-tratamento e utilizando o adesiso FL-Bond II/Shofu; G2 (CF): sem pré-tratamento e utilizando o adesivo Clearfil SE Bond 2/Kuraray Noritake; G3 (Laser + FL): pré-tratamento associado ao uso do FL-Bond II/Shofu e G4 (Laser + CF): pré-tratamento associado ao uso do Clearfil SE Bond 2/Kuraray Noritake Os dentes avaliados foram os pré-molares de ambas as arcadas. A avaliação foi feita imediatamente após o tratamento e ao longo do tempo, em 3, 6 e 12 meses após a finalização da restauração. Para a avaliação da sensibilidade foi considerado a EVA (Escala Visual Analógica) e para a qualidade da restauração o método do USPHS modificado, considerando a avaliação de perda de retenção, integridade marginal, pigmentação marginal, presença de lesão de cárie em margem de restauração, vitalidade pulpar e sensibilidade pós-operatória. Os dados foram registrados em tabelas de frequência, e os escores transformados em postos para a aplicação do teste ANOVA. A significância estatística foi considerada para valores de p<0,05. Para os resultados da avaliação de sensibilidade houve uma diferença estatística significante da sensibilidade ao longo do tempo (p<0,001), sendo que essa diferença se deu a partir da avaliação T1 (48 horas) em todos os grupos. Em relação aos critérios avaliados no USPHS, foram encontrados variações estatísticas em alguns tópicos: Pigmentação marginal - G1 (FL) (p=0,041) e G2 ( Laser + FL) (p=0,009) e Integridade marginal G1(FL)( p=0,036). Os demais grupos e critérios não apresentaram variações estatísticas significantes.Pré-tratamentos com laser Er:YAG podem ser uma alternativa viável em restaurações adesivas do tipo classe V; no entanto, nenhum efeito sinérgico de ambos os tratamentos combinados foi observado.

The objective of this clinical, controlled, randomized, blinded and prospective study was to evaluate the clinical effectiveness of restorations in non-carious lesions (Class V cavities) performed on dental surfaces pre-treated or not with Er:YAG laser and using two adhesive systems self-conditioning. This study was carried out with a total of 91 lesions and divided into 4 groups (n = 23) :G1(FL): No pre-treatment and using the FL-Bond II/Shofu adhesive; G2 (CF): without pre-treatment and using Clearfil SE Bond 2/Kuraray Noritake adhesive; G3 (Laser + FL): pre-treatment associated with the use of FL-Bond II/Shofu and G4 (Laser + CF): pre-treatment associated with the use of Clearfil SE Bond 2/Kuraray Noritake The teeth evaluated were the premolars of both arcades. Assessment was performed immediately after treatment and over time, at 3, 6, and 12 months after completion of the restoration. The VAS (Visual Analogue Scale) was used for the sensitivity assessment and the modified USPHS method for the quality of the restoration, considering the assessment of loss of retention, marginal integrity, marginal pigmentation, presence of caries in the restoration margin. , pulp vitality and postoperative sensitivity. Data were recorded in frequency tables, and the scores were transformed into ranks for the application of the ANOVA test. Statistical significance was considered for values of p<0.05. For the results of the sensitivity evaluation, there was a statistically significant difference in sensitivity over time (p<0.001), and this difference occurred from the T1 evaluation (48 hours) in all groups. Regarding the criteria evaluated at the USPHS, statistical variations were found in some topics: Marginal pigmentation - G1 (FL) (p=0.041) and G2 (Laser + FL) (p=0.009) and Marginal integrity - G1(FL)( p =0.036). The other groups and criteria did not present significant statistical variations. Pretreatments with Er:YAG laser can be a viable alternative in class V adhesive restorations; however, no synergistic effect of both treatments combined was observed.

Comparación del desempeño técnico-asistencial en programas escolares con diferentes modalidades de implementación / Comparison of technical-assisstance performance in school programs with different implementation modalities

Se comparó el desempeño técnico-asistencial de 2 programas de atención odontológica con iguales protocolos de atención y diferente modalidad de implementación. Ambos programas se caracterizaron por un perfil preventivo-promocional; uso de protocolos validados según riesgo biológico, atención odontológica adaptada a sedes no convencionales, recursos asignados por método de necesidades; ejecución por recurso humano pre-profesional supervisado y modulación por altas. La modalidad de implementación difirió en la densidad/concentración de las actividades realizadas: en el Programa Extensivo (PE) las acciones se implementaron con frecuencia semanal; en el Programa Intensivo (PI) las acciones se concentraron en una semana en el año. Cobertura anual: PE = 120 escolares de 6 a 9 años de edad; PI = 180 escolares y preescolares de 3 a 12 años de edad. Se midió la cantidad de prestaciones, sesiones y tiempo -en minutos- hasta alcanzar el Alta Básica Operativa (ABO). Para comparar grupos (PI y PE) se utilizaron los tests: U de Mann Whitney, t de Student para mues-tras independientes, chi cuadrado y comparación de proporciones. La razón de prestaciones/sesión fue significativamente mayor (p=0,000) en el programa intensivo. El número de prestaciones hasta el alta (ABO) y la razón tiempo/sesión no mostraron diferencias entre programas (p=0,8 p=0,087), mientras que se evidenció una mayor razón tiempo/prestación y tiempo en alcanzar el alta (ABO) en la modalidad extensiva (p=0,000). La modalidad intensiva mostró mayor eficiencia en el desempeño técnico asistencial que la extensiva (AU)

Aim: To compare technical-care performance of 2 dental care programs with the same care protocols and different implementation modalities. Both programs shared the following features: preventive-promotional profile; use of validated clinical protocols according to biological risk, dental care adapted to non-conventional settings, allocation of resources by needs method; supervised pre-professional human resource and modulation by discharges. The implementation mode differed in the density/concentration of the activities: in the extensive program (EP) the actions were implemented on a weekly basis along the year; in the intensive program (IP) the actions were concentrated in one week in the year. Annual coverage of the programs: 180 schoolchildren and preschoolers (3 -12 years old); EP = 120 schoolchildren (6 - 9 years old). We measured the following variables: the number of dental services performed, the number of sessions and the time, in minutes, to reach the basic operating discharge (BOD). We used the following tests to compare groups (IP and EP): Mann Whitney U; Student's t for independent samples, chi square and comparison of proportions test. The action per session ratio was significantly higher (p=0.000) in the intensive program. The number of actions performed until discharge (BOD) and the time per session ratio did not show differences between programs (p=0.8 p=0.087). In the extensive mode, compared to intensive mode, it took longer to reach discharge (BOD) (p=0.000) The program implemented with intensive modality (PI) showed greater efficiency regarding technical-care performance when compared to the extensive mode (AU)